FSR Motorsports

Motorsports

Follow Us On:

Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.
E-mail
ProEFI 112 PackageProEFI 128 MKIV Supra ECU & Harness ONLY

ProEFI 128 3000GT Package
View Full-Size Image


ProEFI 128 3000GT Package

Price: $2 ,950.00

Ask a question about this product

FSR Motorsport Creations is proud to bring the latest in cutting edge technology to the 3s/3000gt/Dodge Stealth TT market.  We have taken ProEFI's exemplary 128 ECU and adapter harness, and refined the setup and calibration into the best engine control available for the 6g72 motor, period.  With integrated launch control, traction control, iboost control, flex fuel, and VE based fueling, there really is no limit to what can be accomplished with a ProEFI on your 3000gt.  Why buy from FSR?  We've taken the time to dyno test and setup the ProEFI to integrate seamlessly into the 3s chassis.  That means we'll send you a basemap configured for your injectors, ignition setup, and auxillary controls already.  If you go through with the complete package, we can configure it for all the inputs such as MAP, IAT, flex fuel, and iboost.  Just plug it in, install and wire your sensors up, and tune!  The ProEFI for the 3000gt requires a 1st get cam/crank sensor and includes an easy to install trigger wheel.  If you have a second gen VR4, no problem, the first get cam/crank sensor will bolt on.  We can help you with any specific questions you have.  Feel free to call us for pricing too low to advertise.  909.949.0550

The dyno below is a stock car with STOCK TURBOS and a ProEFI.  You can see the massive gains without changing anything.  With a big turbo setup, the sky's the limit!

The ProEFI 128 ecu has the following and is capable of controlling just about any platform:

Injectors 12 Peak n Hold – with calibratable peak time. 6 – 6/2 amp, and 6 3/1 amp.
Coils 16
TPS Yes – Adaptive
Coolant Temp Yes
Air Temp Yes
Map Sensor Yes – Unlimited Range
Idle Control Pulse Width and Stepper motor – Adaptive
Wideband O2 2 Built in UEGO controllers (External capable)
Cam Yes – Hall/VR capable
Crank Yes – Hall/VR capable
Variable Cam Yes 2 cam capable
Knock Channels 2 Programmable frequency and event with individual cylinder notification
Flex Fuel Capability Add a Flex fuel sensor, and the computer automatically adjusts fuel, timing, and boost based on Ethanol content!
Nitrous Control 4 stages multiple event trigger control range. V.E. based fueling****
Boost Control Multiple control strategies.***
Traction Control Multiple control strategies.***
Fuel Pump Control Yes*
Analog Inputs 34* Fuel Pressure monitoring and feedback correction, Oil Pressure, Exhaust Backpressure Feedback and correction, and much more.
Low Side Outputs 10 total – 8-10 amp capable – 2-2 amp capable*
Tach Yes – Software configurable
Digital Inputs 8 channels – Fully programmable pre configured
High Current Bridges 3 channel sets – Used for Stepper motor control, or Electronic Throttle Control
Speed Inputs 2
Drive By Wire Yes
Fault Coding Safety Yes**
MIL (CEL) Yes – Malfunction indicator with fault codes
Main Relay Control Yes
5v Ref 2 locations
Sensor Grounds 2 locations
Key Switch Power Yes
Permanent Power Yes
Battery Backup No
Chassis Ground 4 Locations
Can Channels 2 Channels
Serial Connection Yes*****
RS485 Connection Yes*****
Internal Memory Limited to Fault logic
USB Direct Connection No
Laptop Connection USB

 

This package includes:

1 x ProEFI 128 ECU

1 x Mitsubishi 3000GT adapter harness

1 x 5 Bar MAP Sensor kit

1 x IAT Sensor kit

1 x Wideband Sensor Kit

1 x Fuel Pressure Sender

1 x iBoost Knob and Solenoid




:

:

:

:

:




image